| T O P I C R E V I E W |
| tswelectronics |
Posted - 24 Oct 2014 : 14:36:17
I installed 18.0.3 and it broke half the connections between schematic to pcb and my latest layout. I repaired from original 18.0.1 file and they are back again so it's something to do with the update.
Trev
|
| 6 L A T E S T R E P L I E S (Newest First) |
| toni9999 |
Posted - 03 Nov 2014 : 08:06:12
Yes they did. |
| rvpilot |
Posted - 27 Oct 2014 : 10:18:32
quote:
Originally posted by edrees
Message from Tech Support,-
Get the VERY latest V18.03 update.
The original earlier update had this bug, now works OK.
Haha ! The VERY latest v18.0.3 should have been called 18.0.4 !?! ... surely ! I hope numberone didn't release a update then re-release the same release with a few more fixes thinking no one would have noticed  |
| Iain Wilkie |
Posted - 24 Oct 2014 : 19:39:16
Just tried 18.0.3, and all seems fine so far.
Iain |
| tswelectronics |
Posted - 24 Oct 2014 : 16:57:25
Might just wait a little while... |
| edrees |
Posted - 24 Oct 2014 : 15:51:04
Message from Tech Support,-
Get the VERY latest V18.03 update.
The original earlier update had this bug, now works OK.
|
| edrees |
Posted - 24 Oct 2014 : 15:04:50
Yeap, I'm getting a similar experience too on a current design.
I seem to have loads of ,-
Cannot find 'D2' pad '2' in PCB design, component 'XYZ' does not match definition in schematic.
Cannot find 'D2' pad '1' in PCB design, component 'XYZ' does not match definition in schematic.
These components were perfectly OK last time before the update.
At least the integrity check flags the errors!
|
