| T O P I C R E V I E W |
| Iain Wilkie |
Posted - 29 Oct 2016 : 17:10:27
Apply Layout Pattern still doesn't seem to work properly ! V20.0.2)
When used it only copies the tracks I have on the top later and not the ones on the bottom !
Anybody else seen this .... or has a solution ?
Iain
|
| 4 L A T E S T R E P L I E S (Newest First) |
| Iain Wilkie |
Posted - 09 Nov 2016 : 09:18:17
Apply Layout Pattern now fixed and working well ..... great support again from Number One !
Iain |
| ianafh |
Posted - 02 Nov 2016 : 08:34:26
Swapping of parallel components I can live with, but it is more often a component from another part of the circuit. The netlist remains correct but the same routing cannot be applied as the relative component positions no longer match.
I have confidence that Numberone will fix it.
Ian.
quote:
Originally posted by Iain Wilkie
The swapping is understandable where components are effectively in parallel. e.g de-coupling caps can become mixed up but thats acceptable.
I have Numberone looking at the problem and they will no doubt report back to me either way.
Iain
|
| Iain Wilkie |
Posted - 01 Nov 2016 : 19:21:27
The swapping is understandable where components are effectively in parallel. e.g de-coupling caps can become mixed up but thats acceptable.
I have Numberone looking at the problem and they will no doubt report back to me either way.
Iain
|
| ianafh |
Posted - 01 Nov 2016 : 16:44:44
Hi Iain,
I have seen something similar. It used to work quite well but lately I have found it necessary to use smaller blocks for it to work correctly.
I often find that while it recreates the same layout pattern it frequently swaps components within the applied pattern.
Ian.
quote:
Originally posted by Iain Wilkie
Apply Layout Pattern still doesn't seem to work properly ! V20.0.2)
When used it only copies the tracks I have on the top later and not the ones on the bottom !
Anybody else seen this .... or has a solution ?
Iain
|
