T O P I C R E V I E W |
michael.clark |
Posted - 06 Mar 2020 : 16:59:35 I am currently having an issue when deleting tracks, where the rats nest disappears. In the previous version (V18) I could simply "forward design changes" from the schematic, and they would reappear. However, I am just getting the "designs are the same" dialog box, and no rats nests. Am I missing something here?
Many thanks, Michael |
4 L A T E S T R E P L I E S (Newest First) |
michael.clark |
Posted - 09 Mar 2020 : 10:36:22 Hi both,
Thank you for your replies. Tools -> Optimise Nets followed by selecting the nets in question fixed the issue.
Many thanks, Michael |
edrees |
Posted - 07 Mar 2020 : 10:30:26 Just wondering on your Settings=>Preferences=>PCB Interaction. DELETE can also delete the connectivity and so the "elastic band" will also be deleted. Using BACKSPACE instead overcomes this issue and only removes a segment of track,keeping the connectivity. Forward Design Change from Schematic may not solve the issue as nothing in the schematic has changed. Try Tools=> Integrity Check first.
|
edrees |
Posted - 06 Mar 2020 : 22:41:30 ....and then try " Optimise nets" again. |
Iain Wilkie |
Posted - 06 Mar 2020 : 19:12:17 In the PCB editor go to View/Display/Settings and Highlights .... mke sure "Connections" is ticked
Iain |