| Author |
 Topic  |
|
|
Kriss
United Kingdom
17 Posts |
 Posted - 21 Sep 2016 : 15:50:29
|
Hello everyone.
How is your display performance ? cause mine on unsatisfactory.
I have 170x170mm pcb - not very complicated and even if i have only 2 layers on it is still doing very slow comparing to super smooth Altium (10/10) and bit less Eagle (7/10). EasyPC scores for 2/10.
Is there a way to improve that?
Tested on I7, 8GB, SSD, HD7700, w7 64
here you have sample:
https://youtu.be/pwdoL1NTEL4
Regards
Krzysztof |
|
|
ianafh
United Kingdom
25 Posts |
Posted - 21 Sep 2016 : 16:08:03
|
I think there was an update that addressed poor graphics performance so it's worth making sure you have the latest patch.
I usually have to turn off net names in pads and tracks on large designs to get reasonable performance.
Ian
quote:
Originally posted by Kriss
Hello everyone.
How is your display performance ? cause mine on unsatisfactory.
I have 170x170mm pcb - not very complicated and even if i have only 2 layers on it is still doing very slow comparing to super smooth Altium (10/10) and bit less Eagle (7/10). EasyPC scores for 2/10.
Is there a way to improve that?
Tested on I7, 8GB, SSD, HD7700, w7 64
here you have sample:
https://youtu.be/pwdoL1NTEL4
Regards
Krzysztof
|
 |
|
|
Kriss
United Kingdom
17 Posts |
Posted - 21 Sep 2016 : 16:16:32
|
I have latest one v20.0.1.
I turned off net name on track and I can see significant improvement - 4/10 now :)
I can't believe this change performance so much! must be crap software engineering. |
|
|
|
Kriss
United Kingdom
17 Posts |
Posted - 21 Sep 2016 : 16:21:38
|
I still have option "draw pad names inside pads" on.
So when I zoomed out (so can see pad names) it's running smoothly.
When zoom in and pad names displayed it's same crap as before. |
|
|
|
edrees
United Kingdom
786 Posts |
Posted - 21 Sep 2016 : 17:40:44
|
Sorry, I can't see any significant reduction in speed compared to V19.
Running WIn7/64 Pro Ver. 20.0.1 with latest (unreleased) patch. Performance perfectly acceptable to me. |
|
|
|
Kriss
United Kingdom
17 Posts |
|
|
Iain Wilkie
United Kingdom
1019 Posts |
Posted - 22 Sep 2016 : 08:53:49
|
I also have patch and all ok at my end. No laggy display problems.
I would contact No1 and ask for the "laggy display" patch ....
iain
|
|
|
|
Kriss
United Kingdom
17 Posts |
Posted - 22 Sep 2016 : 10:58:21
|
| I've just applied unofficial patch but didn't fix lags :( |
|
|
|
Iain Wilkie
United Kingdom
1019 Posts |
Posted - 24 May 2017 : 22:06:49
|
Very strange, this problem has just arisen again for me !
Have emailed support ..... any other suggestions ?
Iain |
|
|
|
John Baraclough
United Kingdom
129 Posts |
Posted - 02 Jun 2017 : 09:54:36
|
quote:
Originally posted by Iain Wilkie
Very strange, this problem has just arisen again for me !
Have emailed support ..... any other suggestions ?
Iain
Iain,
Did you get an answer?
John
-------------------------------------------------------
Birthdays are good for you: the more you have, the longer you live ... and I've had lots of them so I should know! |
|
|
|
Iain Wilkie
United Kingdom
1019 Posts |
Posted - 02 Jun 2017 : 11:22:30
|
John,
In short no .... apparently only recent complainant ! however switching off pad numbers displayed in pads helps a lot.
It is a big layout but I have had much bigger many moons ago and can't really say I noticed it then.
Are you having the same issues ?
Iain |
|
|
|
ianafh
United Kingdom
25 Posts |
Posted - 02 Jun 2017 : 11:36:31
|
Hi Iain,
I see much the same here, especially on large designs. I have a couple of boards that are roughly 370x130mm with just under 4000 pins. For these I have to turn off all of the fancy stuff, so no pad names / net names etc.
Ian. |
|
|
|
John Baraclough
United Kingdom
129 Posts |
Posted - 04 Jun 2017 : 12:39:38
|
quote:
Originally posted by Iain Wilkie
John,
In short no .... apparently only recent complainant ! however switching off pad numbers displayed in pads helps a lot.
It is a big layout but I have had much bigger many moons ago and can't really say I noticed it then.
Are you having the same issues ?
Iain
My largest design these days is only 100mm square so there's no problem with the speed of the display.
-------------------------------------------------------
Birthdays are good for you: the more you have, the longer you live ... and I've had lots of them so I should know! |
|
|
| |
Topic |
|
Poor display performance